Max Growth Berry Shelter

How to Assemble a Max-Growth Berry Shelter

1. Insert the top zip tie: Begin by sliding a zip tie through the top holes of the shelter. It does not need to be attached to the stake at this point—just loosely fasten it.
2. Wrap the shelter: Form the flat sheet into a tube and wrap it around the young berry plant, leaving a 1-inch overlap along the seam.
3. Align with stake: Align the shelter with your support stake. Insert the zip tie through both the shelter and stake and pull it snug to hold the top in place.
4. Add and tighten remaining zip ties: Continue adding zip ties down the shelter, securing each one snugly to the stake to hold the structure firmly upright.
5. Secure the base: Place the final zip tie near the bottom of the shelter to ensure a secure fit at ground level.
6. Fold out top tabs: Bend out the top tabs to prevent sharp edges from contacting the berry stems or leaves.
7. Final inspection: Look down the top of the shelter to ensure the berry plant is not pinched or restricted by the zip ties.

Note: Max-Growth Berry Shelters help protect delicate berry plants from wind and pests, and have been shown to significantly increase survival and growth success.